Bosch Rexroth | AZPF-1X014-RRR12MA
AZPF-1X/014-RRR12MA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-1X/014-RRR12MA gear pump belongs to the AZPF External High Performance Gear Pumps series from Bosch Rexroth. It provides 14.0 cm³ per revolution to supply consistent flow in hydraulic automation circuits. The pump is configured for clockwise rotation so drive selection must match that orientation. Installation aligns to an SAE J744 82-2 A two-bolt mounting flange, and the flange pilot measures 82.55 mm to center the unit on the motor housing. A splined shaft with a major diameter of 15.456 mm couples the pump to the prime mover; the spline has 9 teeth each 2.357 mm thick to transmit torque without backlash. Usable spline length is 21.8 mm, offering sufficient engagement depth for standard female couplings.
During operation the pump tolerates intermittent pressures up to 280 bar, allowing short high-load cycles common in industrial machinery. Hydraulic connections follow the UNF-2B thread standard specified in ISO 11926-1. The pressure port is cut to 7/8-14 UNF-2B, while the suction port uses a 1 1/16-12 UN-2B thread to accept matching fittings. Dynamic sealing relies on NBR material, supporting mineral-oil-based fluids across typical temperature ranges. The assembled unit weighs 3.5 kg, enabling straightforward handling during service or replacement.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement
14.0 cm3/rev
Flange Pilot Diameter
82.55 mm
Max Intermittent Pressure
280 bar
Mounting Flange
SAE J744 82-2 A (2-bolt)
Port Thread Standard
UNF-2B (ISO 11926-1)
Pressure Port Thread
7/8-14 UNF-2B
Seal Material
NBR
Shaft Major Diameter
15.456 mm
Spline Tooth Count
9
Spline Tooth Thickness
2.357 mm
Suction Port Thread
1 1/16-12 UN-2B
Usable Spline Length
21.8 mm
Weight
3.5 kg
1620 Old Apex Road
Shipping & Payment Options
