AZPF-12-016RPR12MA

The AZPF-12-016RPR12MA pump belongs to the AZPF External High Performance Gear Pumps series from Bosch Rexroth and supplies hydraulic flow for automated machinery. A displacement of 16 cm³ per revolution defines the volume delivered each shaft turn and helps calculate circuit flow. Clockwise rotation sets the correct mounting orientation relative to the prime mover. The splined SAE J744 16-4 9T drive shaft matches standard couplings and transmits torque without slip. Its front cover uses a 2-bolt mount with 50 mm spacing in the Variant 2 P configuration, so it aligns with common pump brackets. UN threads to ISO 11926-1 Code 12 form the pressure and suction ports for secure pipe connections. The pump can run at a minimum of 500 rpm when system pressure stays below 100 bar, allowing slow-speed operation. NBR sealing material provides resistance to typical hydraulic oils and maintains leak-free service.

A maximum continuous pressure rating of 250 bar defines the allowable working load during normal duty cycles. The unit accepts intermittent pressure up to 280 bar to accommodate brief overload conditions. A peak pressure capability of 300 bar tolerates short spikes without structural damage. Maximum shaft speed of 3000 rpm supports high-flow circuits when fast actuator response is required. The shaft end withstands up to 110 Nm of torque, ensuring the spline can transfer input power throughout the full pressure and speed range. These limits establish the operating envelope that designers can rely on when integrating the pump into hydraulic automation systems.