AZPF-11-016LCP20KB SO007

The AZPF-11-016LCP20KB SO007 belongs to the AZPF External High Performance Gear Pumps series from Bosch Rexroth and supplies pressurized flow for hydraulic automation circuits. A displacement of 16 cm³ per revolution defines how much fluid is delivered each shaft turn, allowing designers to calculate pump output against speed. Continuous duty is supported up to 3000 rpm, so the unit can match typical electric motor or engine drive ranges without overspeeding. A maximum operating pressure of 280 bar permits use in medium-pressure mobile or industrial systems that need compact power density. The housing carries a two-bolt flange with a 50 mm diameter pilot; this interface centers the pump and simplifies direct mounting to standard European motor adapters. At 2.9 kg, the pump imposes minimal load on equipment structures while remaining easy to handle during service.

The tapered 1:5 drive shaft transfers torque efficiently and helps self-align the coupling under load, and the specific taper angle of 5°42′38″ provides the contact geometry that achieves this grip. An M12 × 1.5 threaded shaft end secures the driven element with a single retaining nut, streamlining assembly. Two M10 class 10.9 mounting bolts clamp the body to the mating flange to resist vibration in mobile machinery. Fluid containment is maintained by an FKM shaft seal, which offers high temperature and chemical resistance needed for modern hydraulic oils. Together these features provide a pump that installs quickly, withstands elevated pressure, and delivers predictable flow in automated hydraulic equipment.