AZPF-11-011RCP20KB SO007

The AZPF-11-011RCP20KB SO007 gear pump belongs to the AZPF External High Performance Gear Pumps series and is produced by Bosch Rexroth for fixed-displacement hydraulic circuits. It delivers 11 cm³ per revolution of geometric displacement, allowing predictable flow when driven at constant speed. The unit withstands up to 280 bar of intermittent pressure so it can operate actuators that demand short bursts of higher load without damage. Clockwise rotation, when viewed on the shaft, defines the correct motor coupling direction and prevents reverse flow in the circuit. An FKM shaft seal designated as type .KB resists heat and common hydraulic fluids, maintaining leakage control at the drive end.

The mechanical interface follows a 9-tooth 16/32 spline that complies with ANSI B92.1, providing accurate torque transmission between pump and prime mover. This drive shaft is dimensioned to the SAE J744 16-4 standard so replacement motors with matching coupling sizes fit without adapters. A two-bolt 101.6 mm front flange defined by SAE J744 101-2 positions the housing precisely against the mounting face and keeps axial alignment under pressure. M6 mounting threads, 13 mm deep, secure the pump to the bracket and distribute load evenly during operation.