Bosch Rexroth | AZPF-11-008RHO30MB
AZPF-11-008RHO30MB
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-11-008RHO30MB pump belongs to the AZPF External High Performance Gear Pumps series produced by Bosch Rexroth for hydraulic automation circuits where stable flow and compact build are required. It turns clockwise, so system designers must align drive shafts accordingly. The displacement is 8.0 cm³ per revolution, establishing the volume of fluid moved during each rotor cycle. A maximum rotational speed of 4000 rpm gives flexibility for variable-speed drives while keeping volumetric efficiency. Continuous operation is rated for 250 bar, allowing it to maintain pressure in closed-loop circuits. Suction inlet conditions are defined between 0.7 and 3 bar absolute, which helps prevent cavitation at the pump entry. The front cover centering diameter measures 36.47 mm, providing a tight fit on mounting brackets and reducing misalignment.
For duty cycles that exceed the nominal point, the pump tolerates 280 bar intermittently and up to 300 bar during brief peaks, enabling short pressure surges without damage. The shaft end is 16.65 mm in diameter and is threaded M12×1.5, facilitating direct coupling with standard drive hubs. Rectangular Flange 30 porting simplifies attachment to manifold blocks, and the ports are secured with M6 fasteners threaded 13 mm deep to resist loosening under vibration. NBR seals are installed to contain hydraulic fluid while tolerating common mineral oils and moderate temperature ranges. These construction details complete the mechanical interface and pressure limits necessary for integrating the pump into industrial power units.
Technical Specifications
Direction Of Rotation
Clockwise
Displacement
8.0 cm3/rev
Front Cover Centering Diameter
36.47 mm
Max Continuous Pressure
250 bar
Max Intermittent Pressure
280 bar
Max Peak Pressure
300 bar
Max Rotational Speed
4000 rpm
Port Fastener
M6 (depth 13)
Porting Type
Rectangular Flange 30
Seals
NBR
Shaft End Diameter
16.65 mm
Shaft End Thread
M12×1.5
Suction Pressure Max (abs)
3 bar
Suction Pressure Min (abs)
0.7 bar
1620 Old Apex Road
Shipping & Payment Options
