Bosch Rexroth | AZPF-10-016LFO30PB
AZPF-10-016LFO30PB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-10-016LFO30PB gear pump belongs to the AZPF External High Performance Gear Pumps series from Bosch Rexroth and delivers pressurized flow for hydraulic automation circuits. It supplies 16 cm³ per revolution, defining the volume moved each shaft turn, and it turns counter-clockwise so the prime mover must match that rotation. A rectangular flange with a 36.47 mm center dimension aligns the housing to common motor faces, while the drive spline offers at least 14.8 mm of usable length to transmit motion securely. Up to 100 Nm of shaft torque can be carried, allowing the pump to handle moderate mechanical loads. FKM is used for the sealing elements to resist heat and hydraulic oil, and a 17 × 30 × 7 mm shaft seal prevents leakage along the drive. The assembly weighs 3.5 kg, so a single technician can position it during installation.
The hydraulic section can sustain 250 bar during continuous duty, and cyclic operation is limited to 210 bar to avoid overstressing internal gears. Brief pressure peaks reaching 300 bar are tolerated, providing a margin against sudden load changes. Suction conditions must stay between 0.7 bar and 3.0 bar absolute so the inlet remains filled without cavitation or aeration. The unit starts to operate reliably from 500 rpm when system pressure is below 100 bar and can accelerate to 3000 rpm at the P2 outlet to meet high flow demands. These pressure and speed ranges make the pump suitable for compact power packs and mobile machinery where consistent oil delivery and quick response are essential.
Technical Specifications
Direction Of Rotation
Counter-Clockwise
Geometric Displacement
16 cm³/rev
Max Continuous Pressure
250 bar
Max Intermittent Pressure
210 bar
Max Pressure Peaks
300 bar
Max Shaft Torque (f Spline)
100 Nm
Max Speed At P2
3000 rpm
Min Speed (p<100 Bar)
500 rpm
Mounting Flange
Rectangular Flange Ø36.47 mm
Sealing Material
FKM
Shaft Seal
17 x 30 x 7 (FKM)
Suction Port Pressure Max (abs)
3.0 bar
Suction Port Pressure Min (abs)
0.7 bar
Usable Spline Length (min)
14.8 mm
Weight
3.5 kg
1620 Old Apex Road
Shipping & Payment Options
