Bosch Rexroth | AZPF-10-014RRR20MB
AZPF-10-014RRR20MB
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-10-014RRR20MB gear pump is manufactured by Bosch Rexroth as part of the AZPF External High Performance Gear Pumps series and supplies fixed-volume flow to hydraulic automation circuits. A geometric displacement of 14 cm³ per revolution establishes the volume delivered on each shaft turn, while clockwise rotation matches standard right-hand drive arrangements. Attachment uses an SAE J744 82-2 (A) mounting flange; its bolt circle diameter of 82.55 mm and 11 mm mounting holes define the fastening interface. Continuous duty is supported up to 250 bar so the pump can maintain stable pressure in long running cycles. NBR sealing material controls leakage when operating with common hydraulic oils, and the overall weight of 3.6 kg allows technicians to position the unit without lifting equipment.
Horizontal flange hole spacing of 106.4 mm and vertical spacing of 127 mm set the rectangular pattern that aligns the housing on engine or motor adapters. Installation screws engage M6 threads to secure the pump against vibration, and a usable spline length of 21.8 mm provides adequate torque transmission to the drive shaft. For transient loading, the design permits 280 bar intermittent pressure and withstands peaks as high as 300 bar, enabling short overload events without damage. Maximum speed at port P2 is limited to 3000 rpm so internal lubrication and efficiency remain within safe limits.
Technical Specifications
Bolt Circle Diameter
82.55 mm
Direction Of Rotation
Clockwise
Flange Hole Spacing (horizontal)
106.4 mm
Flange Hole Spacing (vertical)
127 mm
Geometric Displacement
14 cm³/rev
Max Continuous Pressure
250 bar
Max Intermittent Pressure
280 bar
Max Pressure Peaks
300 bar
Max Speed At P2
3000 rpm
Mounting Flange
SAE J744 82-2 (A)
Mounting Hole Diameter
11 mm
Mounting Screw Thread
M6
Sealing Material
NBR
Usable Spline Length
21.8 mm
Weight
3.6 kg
1620 Old Apex Road
Shipping & Payment Options
