Bosch Rexroth | AZPF-10-011RHO30MB
AZPF-10-011RHO30MB
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-10-011RHO30MB belongs to the AZPF External High Performance Gear Pumps series and is produced by Bosch Rexroth. It supplies hydraulic power in automation circuits where consistent flow and compact mounting are needed. The pump moves 11 cm³ of fluid per revolution, supporting moderate flow rates for actuators and clamping devices. Its rotation is clockwise, so it matches drive trains designed for right-hand shafts. A tapered 1:8 drive shaft promotes reliable torque transmission, while the M12 × 1.5 thread secures the coupling with minimal play. The housing length from the mounting face is limited to 48.5 mm, allowing installation in tight manifolds. A rectangular flange 36.47 mm in diameter forms the front cover and aligns the unit on adapter plates, and connection code 30 confirms the same flange style for the pressure and suction ports. The pump weighs 3.4 kg, permitting single-person handling during service.
For duty cycles that demand higher working pressures, the AZPF-10-011RHO30MB sustains 250 bar continuously, tolerates 280 bar intermittently, and accepts peak spikes up to 300 bar without component fatigue. The overall body length extends to 98.1 mm, which defines the space required when stacking multiple pumps on a common drive. At the intermittent rating it may run as fast as 3500 rpm, enabling high power density in compact power units. The suction and pressure pad include a 20.0 mm port width and a 39.7 mm counterpart to support balanced inlet and outlet flow areas. Each port is fixed by M8 screws that can be driven 13 mm deep, maintaining seal compression under dynamic loads. These dimensional and pressure limits guide designers when integrating the pump into automated presses, injection machines, or servo-controlled hydraulic stages.
Technical Specifications
Dimension A
48.5 mm
Dimension B
98.1 mm
Direction Of Rotation
Clockwise (R)
Displacement
11 cm³/rev
Drive Shaft Thread
M12 × 1.5
Drive Shaft Type
Tapered 1:8 (H)
Front Cover
Rectangular Flange ⌀36.47 mm (O)
Line Connection Code
30 (Rectangular Flange)
Maximum Continuous Pressure (p1)
250 bar
Maximum Intermittent Pressure (p2)
280 bar
Maximum Pressure Peaks (p3)
300 bar
Maximum Speed At P2
3500 rpm
Port Dimension C
20.0 mm
Port Dimension D
39.7 mm
Port Fastening Thread
M8 (depth 13 mm)
Weight
3.4 kg
1620 Old Apex Road
Shipping & Payment Options
