Bosch Rexroth | AZPF-10-011RFO30MB
AZPF-10-011RFO30MB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-10-011RFO30MB gear pump is part of the AZPF External High Performance Gear Pumps series from Bosch Rexroth and serves to supply consistent hydraulic flow in automated machinery. Its displacement is 11 cm³ per revolution, which defines the volume of oil moved each shaft cycle. The shaft turns clockwise, so line connections must match this direction. A minimum speed of 500 rpm at pressures below 100 bar sustains lubrication when the system starts, while a maximum of 3500 rpm limits cavitation at high flow. Continuous operation is allowed up to 250 bar, and temporary overloads can rise to 280 bar to absorb short load changes. Suction conditions must remain above an absolute 0.7 bar to prevent vapor pockets and below 3 bar so the seals are not overstressed.
The pump withstands pressure peaks to 300 bar during fast-acting events in cylinders or motors. A rectangular 36.47 mm front flange positions the housing squarely against a power unit, and a two-bolt Ø52 mm pattern with an O-ring provides a leak-tight face seal. M8 mounting threads cut 13 mm deep hold the body securely, while a usable spline length of at least 14.8 mm lets the drive shaft transmit full torque without bottoming. These dimensions align with standard IEC adapter plates for straightforward assembly. The unit weighs 3.4 kg, so one technician can handle installation or removal without lifting equipment.
Technical Specifications
Displacement
11 cm3/rev
Front Flange
Rectangular (Ø36.47 mm)
Max Continuous Pressure
250 bar
Max Intermittent Pressure
280 bar
Max Pressure Peaks
300 bar
Max Speed
3500 rpm
Minimum Speed (p<100 Bar)
500 rpm
Mounting Thread
M8 (13 mm deep)
Mounting Type
2-Bolt Ø52 mm With O-Ring
Rotation Direction
Clockwise
Suction Port Pressure (abs) Max
3 bar
Suction Port Pressure (abs) Min
0.7 bar
Usable Spline Length (min)
14.8 mm
Weight
3.4 kg
1620 Old Apex Road
Shipping & Payment Options
