Bosch Rexroth | AZPF-10-011LHO20MSXXX25-SO002
AZPF-10-011LHO20MSXXX25 SO002
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPF-10-011LHO20MSXXX25 SO002 gear pump belongs to the AZPF External High Performance Gear Pumps series from Bosch Rexroth and is used to circulate hydraulic oil in automated machinery. It delivers a geometric displacement of 11 cm³ per revolution, allowing precise volumetric flow with each shaft turn. Rotation is specified as counter-clockwise, so it matches power units designed for left-hand drive. Power is transmitted through a 1:8 tapered keyed shaft, while an M12 × 1.5 thread secures the coupling hardware. The front cover centers on a 36.47 mm diameter register for accurate mounting, and hydraulic lines attach by means of a size-20 square flange. Port screws seat in M8 holes that are 13 mm deep, and NBR seals protect against fluid leakage.
An internal residual-flow control valve is integrated to bleed excess oil, and its factory setting limits bypass to 25 l/min to stabilize circuit pressure. Continuous operation is permitted up to 250 bar, with an intermittent ceiling of 280 bar and short peaks tolerated to 300 bar, so the pump can handle dynamic load changes common in industrial presses and tooling. Maximum shaft speed at rated outlet (P2) reaches 3500 rpm for high-throughput cycles, while reliable suction begins at 500 rpm when system pressure stays below 100 bar. These pressure and speed limits guide drive selection and prevent cavitation, ensuring consistent flow and long service life in automated hydraulic systems.
Technical Specifications
Direction Of Rotation
Counter-Clockwise
Displacement (geometric)
11 cm³/rev
Drive Shaft Type
Tapered 1:8 (Keyed)
Flow Control Valve
Internal Residual Flow
Flow Control Valve Setting
25 l/min
Front Cover Centering Diameter
36.47 mm
Line Connection Type
Square Flange (20)
Max Continuous Pressure
250 bar
Max Intermittent Pressure
280 bar
Max Pressure Peaks
300 bar
Max Speed At P2
3500 rpm
Min Speed (p<100 Bar)
500 rpm
Port Fastener Threads
M8 (13 mm depth)
Sealing Material
NBR
Shaft Thread
M12 × 1.5
1620 Old Apex Road
Shipping & Payment Options
