AZPF-10-005LRR20MB

The AZPF-10-005LRR20MB pump belongs to the AZPF External High Performance Gear Pumps series and is manufactured by Bosch Rexroth. It delivers pressurized fluid for hydraulic automation circuits where consistent flow and compact size are required. The unit turns in a counter-clockwise direction, matching power sources that share the same rotation. A geometric displacement of 5.5 cm³ per revolution defines the volume moved each cycle, giving predictable flow when paired with a fixed-speed motor. The pump tolerates operating pressures up to 280 bar, supporting cylinders and motors that demand high force. Its SAE J744 82-2 (A) mounting flange provides a standardized face for quick attachment, while the shaft follows the ANSI B92.1 spline profile so it couples directly to common drive splines without adapters.

The housing can be installed in any orientation, so machine builders have no positional restrictions when laying out the manifold or frame. A maximum rotation speed of 4000 rpm lets the pump reach higher flow rates without cavitation when adequate inlet conditions are maintained. The 82.55 mm pilot diameter centers the body on the drive flange, keeping the shaft alignment within tolerance during start-up and load changes. Both inlet and outlet use a rectangular flange port that accepts face-seal fittings to reduce assembly time and potential leak paths. NBR seals are fitted throughout the unit; this elastomer resists standard hydraulic oils and maintains sealing effectiveness over the full pressure and temperature range expected in industrial duty cycles.