Bosch Rexroth | AZ-P-F-12-014-RAB01MB
AZ-P-F-12-014-RAB01MB
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZ-P-F-12-014-RAB01MB is a gear pump manufactured by Bosch Rexroth in the AZPF External High Performance Gear Pumps series and supplies pressurized fluid for hydraulic automation circuits. A geometric displacement of 14 cm³ per revolution defines the volume moved with each shaft turn, while a maximum rotational speed of 3000 rpm supports higher flow demands. The unit is configured for clockwise rotation, so the drive must follow that direction. An intermittent pressure limit of 280 bar permits short load spikes, and the shaft can transmit up to 110 Nm of torque to sustain those pressures. It is intended for HLP mineral oil according to DIN 51524, and NBR sealing material is selected to remain compatible with this fluid and the specified thermal range.
Ambient operating limits extend from -30 °C to 80 °C, allowing deployment in cold outdoor machinery or warm factory spaces. The front cover incorporates an outrigger bearing with an 80 mm diameter that carries external radial loads and stabilizes the drive shaft. Fluid enters through a G 3/4 suction port machined to a depth of 16 mm, reducing inlet restriction, and exits through a G 1/2 pressure port of the same depth for straightforward line connections. Matching port depths simplify gasket selection and help maintain seal integrity under the listed pressure rating.
Technical Specifications
Ambient Temperature Max (nbr)
+80 °C
Ambient Temperature Min (nbr)
-30 °C
Direction Of Rotation
Clockwise (R)
Front Cover Type
Outrigger Bearing Ø80 mm (Type 1)
Geometric Displacement
14 cm³/rev
Hydraulic Fluid
HLP Mineral Oil (DIN 51524)
Max Intermittent Pressure
280 bar
Max Rotational Speed
3000 rpm
Pressure Port Depth
16 mm
Pressure Port Thread
G 1/2
Sealing Material
NBR (MB)
Shaft Max Transferable Torque
110 Nm
Suction Port Depth
16 mm
Suction Port Thread
G 3/4
1620 Old Apex Road
Shipping & Payment Options
