Bosch Rexroth | AA2FM3261W-VSD510
AA2FM32/61W-VSD510
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA2FM32/61W-VSD510 motor belongs to the A2FM Fixed Motors series from Bosch Rexroth and serves as a hydraulic drive element in automated circuits. Its displacement of 32 cm³ per revolution sets the volume of fluid converted to mechanical rotation, while a nominal speed of 6300 rpm defines the highest continuous shaft speed for stable operation. At the nominal pressure of 400 bar it produces 204 Nm of torque, so machines can obtain consistent output in compact envelopes. The unit withstands a maximum pressure of 450 bar to cover transient load peaks, and it accepts an inlet flow of 202 l/min at nominal speed to match pump delivery. Bidirectional rotation allows the shaft to turn in either direction without internal changes, and compatibility with HLP mineral oil specified by DIN 51524 aligns it with common hydraulic fluids used in industrial plants.
Case drainage conditions are limited to a continuous differential pressure of 2 bar, and brief spikes up to 10 bar are permissible, preventing seal damage during cyclic duty. A minimum high-pressure side value of 25 bar must be maintained so internal bearings remain fully loaded. The rotary group has a moment of inertia of 0.0012 kg·m², allowing rapid speed changes when coupled with a maximum angular acceleration of 6500 rad/s². Rotary stiffness of 3.12 kNm/rad provides resistance to torsional deflection under load, supporting accurate motion control. The motor is rated for a summation pressure of 700 bar, which represents the allowable combined pressure of the high- and low-pressure lines and ensures safe operation within closed hydraulic loops.
Technical Specifications
Continuous Case Δp
2 bar
Direction Of Rotation
Bidirectional
Displacement
32 cm³/rev
Hydraulic Fluid
HLP Mineral Oil (DIN 51524)
Inlet Flow (nnom)
202 l/min
Max Angular Acceleration
6500 rad/s²
Max Case Pressure Peak
10 bar
Maximum Pressure
450 bar
Min High-pressure Side Pressure
25 bar
Moment Of Inertia (rotary Group)
0.0012 kg·m²
Nominal Pressure
400 bar
Nominal Speed
6300 rpm
Rotary Stiffness
3.12 kNm/rad
Summation Pressure
700 bar
Torque (at Pnom)
204 Nm
1620 Old Apex Road
Shipping & Payment Options
