Bosch Rexroth | AA2FLM35560WVZH010
AA2FLM355/60WVZH010
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA2FLM355/60WVZH010 hydraulic motor is part of the A2FM Fixed Motors series from Bosch Rexroth and serves as a fixed-displacement drive element in automated fluid power systems. It displaces 355 cm³ with each revolution, so a given flow rate directly establishes shaft speed. At its nominal speed of 2240 rpm the motor requires 795 l/min of inlet oil, which suits high-flow circuits on mobile or industrial machinery. A continuous working limit of 350 bar allows the unit to deliver 1978 Nm of torque, while a peak limit of 400 bar accommodates momentary overloads. The design supports bidirectional rotation, enabling reversible motion without external valving. An 8-hole mounting flange conforming to ISO 3019-2 simplifies attachment to standard gearboxes or frames.
The housing holds 3.5 l of case oil to lubricate internal bearings and wash away heat. Drain oil returns through an M33×2 port, giving a large pathway that keeps case pressure low. Power exits through a splined shaft built to DIN 5480, and the specific spline form is W60×2×28×9g for positive torque transmission to couplings or planetary drives. FKM seals resist high temperature and mineral oil, extending service intervals in demanding duty cycles. The motor weighs 110 kg, so lifting equipment is required for installation. Working ports use a 1 1/2 in SAE J518 pattern, and each port is secured with an M16×2 fastening thread to ensure leak-free connections under full pressure.
Technical Specifications
Case Volume
3.5 l
Direction Of Rotation
Bidirectional
Displacement Per Revolution
355 cm³/rev
Drain Port Thread
M33×2
Drive Shaft Spline
W60×2×28×9g
Drive Shaft Type
Splined Shaft (DIN 5480)
Inlet Flow At Nominal Speed
795 l/min
Maximum Pressure
400 bar
Mounting Flange
8-Hole (ISO 3019-2)
Nominal Pressure
350 bar
Nominal Speed
2240 rpm
Seal Material
FKM
Torque At Nominal Pressure
1978 Nm
Weight
110 kg
Working Port Fastening Thread
M16×2
Working Port Size
1 1/2 in (SAE J518)
1620 Old Apex Road
Shipping & Payment Options
