Bosch Rexroth | AA10VO60DRG52R-VUC62N00-SO97
AA10VO60DRG/52R-VUC62N00-SO97
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VO60DRG/52R-VUC62N00-SO97 pump is manufactured by Bosch Rexroth and belongs to the A10VSO Variable Pumps series. Designed for hydraulic automation circuits, it varies displacement to match actuator demand and maintain stable system pressure. The unit is rated for a nominal working pressure of 4000 psi (280 bar), while the suction port tolerates absolute inlet pressures between 12 psi (0.8 bar) and 435 psi (30 bar) to support reliable priming under diverse reservoir conditions. Fluid enters port S and exits port B, and internal components rotate clockwise to build flow in this direction. Service connections are arranged on the side of the housing under the 62 N00 layout, which simplifies manifold mounting. There is no through drive interface, so the pump cannot chain additional pumps. Case drainage must remain below 29 psi (2 bar) absolute, and the pilot relief valve line may not exceed 2 m to ensure accurate control response.
Peak system excursions up to 5100 psi (350 bar) are permitted for short periods without damaging the rotating group. Case drain pressure may rise no more than 7 psi (0.5 bar) above the inlet line, protecting shaft seals and bearings. The DRG pressure compensator limits control drift to a maximum hysteresis of 45 psi (3 bar) so flow remains consistent around the setpoint. At a standard differential pressure of 290 psi (20 bar) the compensator draws only 0.4 gpm (1.5 l/min) of pilot oil and, even under worst-case modulation, total pilot consumption does not exceed 1.2 gpm (4.5 l/min); this keeps heat generation in the tank low. The fluid path is sealed with FKM elastomers, granting compatibility with common mineral oils and some synthetic blends. These characteristics make the AA10VO60DRG/52R-VUC62N00-SO97 suitable for compact power units where precise pressure regulation and minimal parasitic losses are required.
Technical Specifications
Case Drain Abs Pressure Max
29 psi (2 bar)
Case Drain Over Inlet Max
7 psi (0.5 bar)
Control Hysteresis Max
45 psi (3 bar)
Direction Of Flow
S To B
Dr/drg Pilot Oil Consumption Max
1.2 gpm (4.5 l/min)
Drg Differential Pressure Standard
290 psi (20 bar)
Drg Pilot Flow At Std Dp
0.4 gpm (1.5 l/min)
Inlet Abs Pressure Max
435 psi (30 bar)
Inlet Abs Pressure Min
12 psi (0.8 bar)
Nominal Pressure
4000 psi (280 bar)
Peak Pressure
5100 psi (350 bar)
Pilot Relief Valve Line Length Max
2 m
Rotation Direction
Clockwise (R)
Seals
FKM
Service Ports Layout
Ports On Side (62 N00)
Through Drive
None (N00)
1620 Old Apex Road
Shipping & Payment Options
