Bosch Rexroth | AA10VO60DR52R-VSC62N00
AA10VO60DR/52R-VSC62N00
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VO60DR/52R-VSC62N00 pump is produced by Bosch Rexroth for the A10VSO Variable Pumps series. It uses an axial piston swashplate design, which adjusts the stroke angle to change output flow for precise hydraulic automation. The unit is intended for open circuit layouts so the reservoir can feed the inlet without charge pressure equipment. A geometric displacement of 60 cm³ per revolution defines the volume delivered each shaft turn, giving predictable flow scaling with speed. Clockwise rotation matches common prime mover arrangements, while flow is routed from port S to port B to match standard line markings. Service ports are placed on the side in the 62 orientation, allowing compact manifold mounting. SAE J518 flanges are provided so pipe connections meet widely used industrial dimensions. There is no through-drive section, which confines power take-off to the primary shaft and simplifies housing construction.
In operation the pump supports a continuous pressure of 280 bar, ensuring stable force transmission in production equipment, and it tolerates peak events up to 350 bar for brief overloads. The inlet can be supplied at pressures between 0.8 and 30 bar absolute, a range that accommodates flooded suction or boosted feed conditions. Case drain pressure must remain below 2 bar absolute to prevent excessive bearing loads. Delivery is governed by a DR pressure controller that swivels the swashplate once system pressure reaches the 280 bar factory setting, maintaining circuit pressure without external valves. Controller hysteresis is limited to 3 bar, minimizing pressure fluctuation during load changes and keeping actuators responsive. These pressure limits, together with the built-in control, enable reliable and repeatable hydraulic performance within automated assemblies.
Technical Specifications
Case Drain Pressure Max (abs)
2 bar
Circuit Type
Open Circuit
Control Type
DR Pressure Controller
Direction Of Flow
S To B
Displacement
60 cm³/rev
Dr Factory Pressure Setting
280 bar
Dr Hysteresis (max)
3 bar
Max Inlet Pressure (abs)
30 bar
Min Inlet Pressure (abs)
0.8 bar
Nominal Pressure
280 bar
Peak Pressure
350 bar
Port Standard
SAE J518 Flange
Pump Type
Axial Piston (Swashplate)
Rotation Direction
Clockwise (R)
Service Ports Orientation
Side (62)
Through Drive
None (N00)
1620 Old Apex Road
Shipping & Payment Options
