Bosch Rexroth | AA10VO60DR52L-VUC61N00
AA10VO60DR/52L-VUC61N00
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VO60DR/52L-VUC61N00 pump belongs to the A10VSO Variable Pumps series manufactured by Bosch Rexroth for hydraulic automation circuits. It uses a DR pressure controller to adjust displacement based on system demand while maintaining a nominal pressure of 280 bar (4000 psi). During short load spikes the unit withstands a peak pressure of 350 bar (5100 psi). Oil enters at port S and exits at port B, and the shaft turns left in counter-clockwise rotation to establish this flow path. The pump is intended for mineral oil HLP conforming to DIN 51524-2, and the fluid may reach temperatures up to 115 °C without affecting function. These characteristics allow the pump to deliver stable flow and pressure regulation in mobile or stationary machinery.
Connection points are grouped at the rear, identified by location code 61, to simplify manifold mounting. The suction and pressure ports both follow SAE J518 dimensions, whereas the drain port uses the ISO 11926 pattern to route leakage oil back to tank. A maximum case drain pressure of 2 bar (29 psi) protects shaft seals made from FKM against excess load. Suction lift is limited to 800 mm so inlet conditions remain above vapor pressure and prevent cavitation. Because there is no through drive (N00), the housing cannot pass mechanical power to additional pumps. These interface details and limits complement the performance data in paragraph one and define installation requirements for the AA10VO60DR/52L-VUC61N00.
Technical Specifications
Control Type
DR Pressure Controller
Direction Of Flow
S To B
Drain Port Standard
ISO 11926
Fluid Type
Mineral Oil HLP (DIN 51524-2)
Max Case Drain Pressure
2 bar (29 psi)
Max Fluid Temperature
115 °C
Max Suction Height
800 mm
Nominal Pressure
280 bar (4000 psi)
Peak Pressure
350 bar (5100 psi)
Ports Location
Rear (61)
Pressure Port Standard
SAE J518
Rotation
Left (CCW)
Sealing Material
FKM
Suction Port Standard
SAE J518
Through Drive
None (N00)
1620 Old Apex Road
Shipping & Payment Options
