Bosch Rexroth | AA10VO60DFR152R-VSD62N00
AA10VO60DFR1/52R-VSD62N00
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VO60DFR1/52R-VSD62N00 pump belongs to the A10VSO Variable Pumps series and is manufactured by Bosch Rexroth to supply adjustable hydraulic flow in automation that uses open circuits. Displacement is regulated by the DFR1 control, which maintains a constant delta pressure of 200 psi (14 bar) between the pump outlet and the load so that flow rises only when system demand increases. The housing withstands a nominal working pressure of 4000 psi (280 bar) and accepts short-term peaks to 5100 psi (350 bar), supporting cylinders that experience rapid shock loads. Shaft rotation is clockwise, a configuration that matches common engine drives, while internal galleries direct oil from port S to port B in accordance with typical schematic symbols. A SAE J744 mounting flange positions the unit on standard PTO pads, and the absence of a through drive means no secondary pump can be bolted in line, keeping the installation short and rigid.
Service connections coded 62 place all working and drain ports on one side, allowing easy tube routing in compact power packs. Pressure and return interfaces follow the SAE J518 pattern, so widely available split-flange fittings can be secured without special adapters. The pump uses FKM seals to resist high temperature and petroleum-based fluids during continuous duty. Inlet limits range from 12 psi (0.8 bar) absolute to 435 psi (30 bar) absolute, giving designers flexibility to operate with flooded intakes or charged feed lines, while case drain pressure must stay below 29 psi (2 bar) absolute to protect the shaft seal. ISO 4406 cleanliness level 20/18/15 is required to keep the sliding piston components free of abrasive contamination. These conditions enable the pump to deliver stable, high-pressure flow to hydraulic actuators in industrial and mobile equipment.
Technical Specifications
Control Type
DFR1
Dfr1 Delta Pressure
200 psi (14 bar)
Direction Of Flow
S To B
Direction Of Rotation
Clockwise (R)
Fluid Cleanliness Min
ISO 4406 20/18/15
Max Case Drain Pressure (abs)
29 psi (2 bar)
Max Inlet Pressure (abs)
435 psi (30 bar)
Min Inlet Pressure (abs)
12 psi (0.8 bar)
Mounting Flange
SAE J744
Nominal Pressure
4000 psi (280 bar)
Operating Mode
Open Circuit
Peak Pressure
5100 psi (350 bar)
Seal Material
FKM (V)
Service Port Location
Side (62)
Through Drive
None (N00)
Working Port Standard
SAE J518
1620 Old Apex Road
Shipping & Payment Options
