1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The A10VSO140DFLR/31L-VPB12N00 variable pump is manufactured by Bosch Rexroth for the A10VSO Variable Pumps series and supplies adjustable oil flow in hydraulic automation. It employs DFLR pressure, flow, and power control so system demand sets the swashplate angle. The unit displaces 140 cm³ per revolution, and it turns counter-clockwise to match standard drive engines. Oil is directed from port S to port B, permitting consistent circuit layout. A nominal pressure rating of 280 bar defines continuous duty limits, while control becomes active at 80 bar to keep the load compensated. When operated at the maximum swashplate angle, shaft speed must not exceed 1800 rpm, a point where the pump can deliver 252 l/min to downstream actuators.
For short load peaks the pump tolerates 350 bar, providing reserve above the nominal rating. With the displacement reduced, allowable speed rises to 2100 rpm to maintain flow with a smaller geometric volume. The inlet side requires at least 0.8 bar absolute to prevent cavitation, and the case drain line must stay below 2 bar to protect shaft seals. At 280 bar the shaft must transmit 623 Nm of torque, supported by a moment of inertia of 0.574 lb·ft² that influences acceleration. Power demand reaches 118 kW under 280 bar at 1800 rpm, and the assembled unit weighs 60 kg for installation planning.
Case Drain Pressure Max
2 bar
Control Type
DFLR (Pressure/Flow/Power)
Direction Of Flow
S To B
Direction Of Rotation
Counter-Clockwise
Displacement
140 cm³/rev
Inlet Absolute Pressure Min
0.8 bar
Max Flow At Nmax
252 l/min
Max Speed At Reduced Vg
2100 rpm
Max Speed At Vg Max
1800 rpm
Moment Of Inertia
0.574 lb·ft²
Nominal Pressure
280 bar
Peak Pressure
350 bar
Power At 280 Bar, 1800 Rpm
118 kW
Start Of Control (dflr)
80 bar
Torque At 280 Bar
623 Nm
Weight
60 kg
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business