Bosch Rexroth | AA10VM63HZ52W1-VWC60N000
AA10VM63HZ/52W1-VWC60N000
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VM63HZ/52W1-VWC60N000 axial piston unit belongs to the A10VM Variable Motors series from Bosch Rexroth and converts hydraulic power into controlled rotary motion for automated machinery. Its maximum geometric displacement of 62 cm³ per revolution determines the fluid volume moved each turn at full swashplate angle. A variable direction of rotation supports bidirectional travel without external gear sets. When displacement is at its maximum the motor can run up to 3300 rpm, yet it starts smoothly from 250 rpm to suit low-speed drives. With displacement minimized, permissible speed rises to 3900 rpm for high-flow conditions. An ISO 3019-1 two-bolt mounting flange aligns the housing with standard frames, while a 1-inch 15-tooth 16/32DP spline transmits torque through common couplings. Internal lubrication is served by a 0.8 liter case volume that also aids heat removal.
A continuous operating pressure of 280 bar allows use in closed-loop propel circuits, and transient loads up to 350 bar can be tolerated for short durations. At rated speed and full displacement the inlet flow requirement is 205 l/min, informing pump sizing. Under these conditions the shaft delivers 276 Nm of torque at 280 bar for medium-duty traction tasks. Swashplate control relies on a pilot supply that must stay between 30 bar and 280 bar to ensure precise angle positioning. The pilot line connects to port X, which is threaded 7/16-20 UNF-2B for compatibility with standard fittings. Working pressure ports are arranged on plate code 60 that follows ISO 6162-2 with UNF threads, promoting consistent manifold layouts.
Technical Specifications
Case Volume
0.8 l
Direction Of Rotation
Variable
Drive Shaft Spline
1 in 15T 16/32DP
Geometric Displacement (max)
62 cm³/rev
Inlet Flow At Nnom, Vg Max
205 l/min
Max Pilot Pressure (hz)
280 bar
Max Speed (vg Max)
3300 rpm
Max Speed (vg Min)
3900 rpm
Maximum Pressure
350 bar
Min Speed (vg Max)
250 rpm
Minimum Pilot Pressure (hz)
30 bar
Mounting Flange
ISO 3019-1 (2-bolt)
Nominal Pressure
280 bar
Pilot Port X Thread
7/16-20 UNF-2B
Torque At 280 Bar, Vg Max
276 Nm
Working Port Plate
60 (ISO 6162-2 UNF)
1620 Old Apex Road
Shipping & Payment Options
