Bosch Rexroth | AA10VG45EP3D110R-NSC60F045DP-S
AA10VG45EP3D1/10R-NSC60F045DP-S
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10VG45EP3D1/10R-NSC60F045DP-S belongs to the A10VG Variable Piston Pumps series from Bosch Rexroth and is used to generate controlled hydraulic flow in mobile automation loops. Its main displacement is 46 cm³ per revolution, establishing the fundamental volume moved by each rotation of the swash plate. A separate boost pump delivers 8.6 cm³ of charge oil each cycle to keep the rotating group supplied and cooled. Electrical actuation is powered by a 12 V DC EP3 control circuit; the proportional valve begins to stroke at 400 mA and reaches full command at 1115 mA, while a solenoid limiting current of 1.54 A prevents coil overheating. Service ports for both A and B lines follow the SAE J518 3/4-inch pattern, allowing direct connection to common flange adapters without additional manifolds.
The unit maintains lubrication and internal pressure balance down to a minimum speed of 500 rpm, yet it can run continuously at 3300 rpm when full output is required. A capped speed of 3550 rpm applies to limited-duty cycles, and short surges up to 3800 rpm are permissible for transient demand. When driven at rated speed the pump can deliver 152 L/min of flow, enabling sizable actuator movements. The hydraulic circuit can be loaded to 300 bar on a sustained basis, with brief peaks accepted up to 350 bar to absorb shock events. Driving the pump at the nominal pressure calls for 220 Nm of input torque, a value that guides prime-mover selection in compact mobile equipment.
Technical Specifications
Boost Pump Displacement
8.6 cm3
Control Voltage (ep3)
12 V DC
Displacement
46 cm3/rev
Ep3 End Of Control
1115 mA
Ep3 Start Of Control
400 mA
Intermittent Max Speed
3800 rpm
Limited Max Speed
3550 rpm
Max Flow
152 l/min
Max Speed (continuous)
3300 rpm
Min Speed
500 rpm
Nominal Pressure
300 bar
Peak Pressure
350 bar
Service Ports A/b
SAE J518 3/4 in
Solenoid Limiting Current
1.54 A
Torque At 300 Bar
220 Nm
1620 Old Apex Road
Shipping & Payment Options
