Bosch Rexroth | AA10FM6352W-VWC60N000
AA10FM63/52W-VWC60N000
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10FM63/52W-VWC60N000 motor belongs to the A10FM Piston Motors series from Bosch Rexroth and is intended to convert hydraulic energy into mechanical rotation in automated circuits. It delivers a geometric displacement of 63.1 cm³ per revolution so the pump or motor connected to it receives a defined volume each cycle. An ISO 3019-1 two-hole mounting flange positions the housing accurately on the machine frame, while a 1 in 15-tooth 16/32DP splined shaft transfers torque to the load without backlash. A 7/8-14 UNF-2B drain port thread allows leakage oil to return to tank with standard fittings. Rotation can alternate in either direction, which simplifies circuit design in mobile or industrial drives requiring reversible motion. The unit is specified for HLP hydraulic fluid according to DIN 51524 to maintain lubricity and reduce wear. At maximum swivel angle it can reach 3400 rpm, permitting high-speed operation when flow is available. Meeting that demand, the inlet flow at nominal speed is 215 l/min, ensuring the motor receives adequate oil volume for continuous duty.
The motor weighs 22 kg, light enough for installation by a single technician yet robust for heavy-duty cycles. A nominal pressure rating of 280 bar supports routine working loads, and the design tolerates up to 350 bar when peak pressure spikes occur. When set to maximum displacement at 280 bar it produces 281 Nm of torque, supplying substantial turning force to propel vehicle drives or winches. Under the same conditions, mechanical output can reach 100.1 kW, giving designers a clear power ceiling for sizing transmissions. The rotating group carries a moment of inertia of 0.0056 kg·m², enabling rapid speed changes with minimal energy loss. Maximum angular acceleration is limited to 3300 rad/s² so control systems can calculate safe ramp rates. An FKM seal set resists mineral oil and high temperatures, preventing external leakage over prolonged service life.
Technical Specifications
Direction Of Rotation
Alternating
Displacement (geometric)
63.1 cm³/rev
Drain Port Thread
7/8-14 UNF-2B
Drive Shaft Spline
1 in 15T 16/32DP
Hydraulic Fluid
HLP (DIN 51524)
Inlet Flow At Nnom
215 l/min
Max Angular Acceleration
3300 rad/s²
Max Speed At Vg Max
3400 rpm
Maximum Pressure
350 bar
Moment Of Inertia
0.0056 kg·m²
Mounting Flange
ISO 3019-1 (2-hole)
Nominal Pressure
280 bar
Power At 280 Bar And Nnom
100.1 kW
Sealing Material
FKM
Torque At Vg Max (280 Bar)
281 Nm
Weight
22 kg
1620 Old Apex Road
Shipping & Payment Options
