Bosch Rexroth | AA10FM5852W-VWC60N000
AA10FM58/52W-VWC60N000
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AA10FM58/52W-VWC60N000 axial piston motor belongs to the A10FM Piston Motors series and is manufactured by Bosch Rexroth for hydraulic automation tasks that require controlled rotary motion. It operates with alternating rotation so the shaft can run in either direction within closed-loop circuits. A displacement of 58 cm³ per revolution defines the fluid volume converted to mechanical output each turn, while an inlet flow of 209 l/min at nominal speed aids pump selection. The motor accepts up to 3600 rpm, which supports compact drives needing high shaft speed. Rotary power is transferred through a 1 in, 15-tooth spline cut to a 16/32 DP profile, ensuring low-backlash coupling. Installation uses an ISO 3019-1 two-hole flange that fits common mounting pads. Hydraulic fluid enters the ISO 6162 3/4 in working ports on port plate 60, and FKM sealing material limits leakage under temperature and chemical stress.
The unit carries a nominal pressure rating of 280 bar for continuous duty and withstands a maximum pressure of 350 bar during transient spikes. These limits support 258 Nm of torque at maximum displacement under nominal pressure, and 97.4 kW of shaft power when operated at the same pressure and speed. Bearings tolerate up to 2000 N of axial load and 1700 N of radial load at half shaft length, protecting against thrust and side forces from external transmission components. A 3/8-16 UNC-2B thread, 21 mm deep, fastens port plate 60 to the machine frame, and excess case oil exits through a 7/8-14 UNF-2B drain port to maintain low internal pressure. These mechanical and hydraulic interfaces help designers match the motor to pumps, hoses, and structural supports in mobile or industrial automation systems.
Technical Specifications
Direction Of Rotation
Alternating
Displacement Per Revolution
58 cm³/rev
Drain Port Thread
7/8-14 UNF-2B
Drive Shaft Spline
1 in 15T (16/32DP)
Inlet Flow At Nominal Speed
209 l/min
Max Axial Load
2000 N
Max Radial Load At A/2
1700 N
Max Rotational Speed (vg Max)
3600 rpm
Maximum Pressure
350 bar
Mounting Flange
ISO 3019-1 (2-hole)
Nominal Pressure
280 bar
Port Fastening Thread (plate 60)
3/8-16 UNC-2B; 21 mm
Power At Nominal Speed (280 Bar)
97.4 kW
Sealing Material
FKM
Torque At Vg Max (280 Bar)
258 Nm
Working Ports
ISO 6162 3/4 in (Port Plate 60)
1620 Old Apex Road
Shipping & Payment Options
