Bosch Rexroth | 4WRSEH6XB00PE-3XG24K0B5V-667
4WRSEH6XB00PE-3X/G24K0/B5V-667
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSEH6XB00PE-3X/G24K0/B5V-667 valve belongs to the 4WRSE High Response Control Valves series manufactured by Bosch Rexroth for precise hydraulic automation. It is powered from a 24 V DC supply so the electronics can be tied directly to common machine control buses, and the coil draws up to 2 A which guides fuse sizing and cable selection. A 100 % duty cycle allows the solenoid to remain energized without interruption, while a maximum coil temperature of 150 °C tolerates elevated ambient and fluid heat. Electrical contact is made through a DIN EN 175201-804 plug, giving quick disconnect capability during service. An inductive position transducer tracks spool travel without mechanical wear, enabling closed-loop control. The enclosure carries an IP65 rating that shields internal components from dust and low-pressure jets of water. With a weight of 3.0 kg, the unit can be mounted on a compact manifold block without excessive structural reinforcement.
The hydraulic section is rated for 315 bar maximum operating pressure so it can regulate high-pressure servo circuits, and it passes up to 80 l/min of fluid to support medium-sized actuators. Maximum hysteresis is limited to 0.05 %, keeping the difference between command input and actual spool position very small; response sensitivity is specified at 0.03 %, meaning minute signal changes are translated into proportional flow adjustments. The valve seats on a DIN 24340 Form A6 interface, and its ports follow the ISO 4401-03-02-0-94 pattern to match standard subplates. Mounting screws are tightened to 7 Nm so sealing integrity is maintained without damaging the housing. System cleanliness must meet ISO 4406 18/16/13 to prevent abrasive particles from affecting the precision edges and magnetic gaps inside the valve.
Technical Specifications
Cleanliness Class
ISO 4406 18/16/13
Coil Temperature Max.
150 °C
Current Consumption Max.
2 A
Duty Cycle
100%
Electrical Connection
DIN EN 175201-804 Plug
Hysteresis Max.
0.05%
Maximum Operating Pressure
315 bar
Maximum Permissible Flow
80 l/min
Mounting Interface
DIN 24340 Form A6
Porting Pattern
ISO 4401-03-02-0-94
Position Transducer Type
Inductive
Protection Class
IP65
Response Sensitivity Max.
0.03%
Supply Voltage
24 V DC
Tightening Torque
7 Nm
Weight
3.0 kg
1620 Old Apex Road
Shipping & Payment Options
