4WRSE6V10-3X/G24K0/F1V

The 4WRSE6V10-3X/G24K0/F1V valve is produced by Bosch Rexroth as part of the 4WRSE High Response Control Valves series. It regulates hydraulic actuation loops where rapid directional and flow control are required. The valve size is 6, which defines the mounting envelope and fits compact manifold layouts. A porting pattern in accordance with ISO 4401-03-02-0-94 aligns the pressure and tank ports with standardized subplates. Under a 10 bar differential, the unit delivers a nominal flow of 10 l/min, while a maximum permissible flow of 80 l/min supports short demand peaks without exceeding design limits. Channels p, a, and b can be pressurized up to 315 bar, enabling operation in high-pressure circuits. FKM seals are fitted to tolerate common mineral oils and elevated temperatures, and the hydraulic fluid must reach cleanliness class ISO 4406 18/16/13 to protect internal surfaces. The assembly weighs 3.0 kg, allowing a single technician to install it without lifting gear.

The electronics operate from a nominal 24 V DC supply that ensures consistent solenoid response. A 4–20 mA command signal sets the target position, and a matching 4–20 mA actual value signal returns spool feedback to the controller for closed-loop accuracy. Load circuits up to 500 Ω can be driven by the internal amplifier, and current consumption is limited to 2 A so standard power supplies can be used. Continuous duty is rated at 100 percent, meaning the coil can stay energized indefinitely without thermal derating. The connector style follows DIN EN 175201-804, giving a quick pluggable interface for power and feedback lines. An IP65 ingress protection rating blocks dust and low-pressure water jets, permitting direct mounting on machinery without additional enclosures. Together these electrical features complement the hydraulic characteristics introduced earlier and create a responsive control element for precise automation tasks.