Bosch Rexroth | 4WRSE6V10-3XG24K0A1V
4WRSE6V10-3X/G24K0/A1V
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSE6V10-3X/G24K0/A1V belongs to the 4WRSE High Response Control Valves series manufactured by Bosch Rexroth for precise hydraulic automation. It accepts a supply voltage of 24 VDC so the coil can be powered directly from standard machine control power rails. Maximum current consumption is 2 A, defining the required capacity of the drive electronics. A ±10 V command input provides a common analog interface for motion controllers, and a minimum input impedance of 50 kΩ prevents the valve from loading those signal sources. The unit returns spool position through a ±10 V actual value output limited to 2 mA, giving feedback for closed-loop control. Connection is made with a DIN EN 175201-804 plug which streamlines wiring in manifolds. The valve is built in size 6 so it fits compact subplates and cavities, and a weight of 3.0 kg aids single-person installation.
The valve handles operating pressures up to 315 bar, allowing use in high-pressure circuits such as presses or injection molding machines. A nominal flow of 10 l/min at a 10 bar differential defines baseline sizing, while a permissible flow ceiling of 80 l/min supports rapid cylinder movements when system pressure is lower. Protection class IP65 shields internal components from dust and water jets during routine wash-down. Fluid in the circuit should meet ISO 4406 cleanliness level 18/16/13 to keep the precision spool and sleeve free of abrasive wear. Hysteresis is held below 0.05 %, and response sensitivity stays under 0.03 %, so commanded position changes translate into predictable flow shifts. Zero-point drift remains under 0.5 % per 100 bar, limiting offset errors as pressure varies.
Technical Specifications
Actual Value Output
±10 V (2 mA max)
Command Input
±10 V
Current Consumption (max)
2 A
Electrical Connector
DIN EN 175201-804
Fluid Cleanliness (iso 4406)
18/16/13
Hysteresis
0.05% (max)
Input Impedance (command)
50 kΩ (min)
Max Operating Pressure
315 bar
Max Permissible Flow
80 l/min
Nominal Flow (Δp=10 Bar)
10 l/min
Protection Class
IP65
Response Sensitivity
0.03% (max)
Supply Voltage
24 VDC
Valve Size
6
Weight
3.0 kg
Zero Point Drift (per 100 Bar)
0.5% (max)
1620 Old Apex Road
Shipping & Payment Options
