Bosch Rexroth | 4WRSE6V1-20-3XG24KOA1V
4WRSE6V1-20-3X/G24KO/A1V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSE6V1-20-3X/G24KO/A1V valve belongs to the 4WRSE High Response Control Valves series from Bosch Rexroth and serves electrohydraulic automation tasks that require rapid spool positioning and accurate flow control. It runs on a 24 VDC supply delivered through a DIN EN 175201-804 connector and draws a maximum of 2 A. The interface accepts a ±10 V command value signal, while integrated electronics provide a ±10 V actual value limited to 2 mA. Continuous operation is supported by a 100 % duty cycle rating, allowing the actuator to remain energized without interruption. The solenoid winding tolerates coil temperatures up to 150 °C, and the enclosure meets IP65 protection to guard internal components against dust and low-pressure water.
Hysteresis does not exceed 0.05 %, so position repeatability remains tight under changing loads. Response sensitivity is capped at 0.03 %, and the same 0.03 % figure defines the range of inversion, ensuring small input changes translate into proportional hydraulic output. The unit handles working pressures to 315 bar, delivers a nominal flow of 20 l/min at a 10 bar differential, and allows a maximum flow of 80 l/min for high-demand circuits. Mounting uses the ISO 4401-03-02-0-94 port pattern to match common subplates, and service fluid must be maintained to ISO 4406 code 18/16/13 to protect the precision spool and metering edges.
Technical Specifications
Actual Value Signal
±10 V (2 mA max)
Coil Temperature
150 °C (max)
Command Value Signal
±10 V
Current Consumption
2 A (max)
Duty Cycle
100%
Electrical Connector
DIN EN 175201-804
Fluid Cleanliness
ISO 4406 18/16/13
Hysteresis
0.05% (max)
Max Operating Pressure
315 bar
Max Permissible Flow
80 l/min
Nominal Flow
20 l/min (Δp 10 bar)
Port Pattern
ISO 4401-03-02-0-94
Protection Type
IP65
Range Of Inversion
0.03% (max)
Response Sensitivity
0.03% (max)
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
