Bosch Rexroth | 4WRSE6V04-3XG24K0A1V
4WRSE6V04-3X/G24K0/A1V
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSE6V04-3X/G24K0/A1V valve belongs to the 4WRSE High Response Control Valves series from Bosch Rexroth and modulates hydraulic flow in automation loops that require fast position control. It accepts a ±10 V command signal for set-point input and returns a ±10 V actual value signal so a closed-loop controller can compare feedback without extra scaling. A continuous duty cycle of 100 % allows the coil to remain energized during long production shifts, while maximum current consumption is limited to 2 A to ease sizing of power supplies. The solenoid operates on a 24 V DC supply common in machine control cabinets, and the DIN EN 175201-804 connector enables quick electrical replacement. An IP65 enclosure keeps dust and low-pressure water jets away from internal electronics, permitting mounting near spray zones, and the overall weight is 3.0 kg, which allows installation on small manifolds without extra support.
The valve tolerates operating pressures up to 315 bar, letting it regulate actuator circuits that run near common pump limits. A nominal flow of 4 l/min provides precise metering, yet the design can pass as much as 80 l/min during dynamic moves when the spool is fully open. Mineral oils classified HL or HLP as well as HFD-R fire-resistant fluids are approved, giving flexibility in fluid selection. Flow accuracy is supported by hysteresis not exceeding 0.05 %, which minimizes steady-state position error. Coil insulation withstands temperatures up to 150 °C, preventing thermal damage during continuous energizing in hot environments. The valve interfaces with sub-plates using the ISO 4401-03-02-0-94 porting pattern, and proper clamping is achieved by tightening mounting screws to 7 Nm to maintain seal integrity under full pressure.
Technical Specifications
Actual Value Signal
±10 V
Command Signal (a1)
±10 V
Duty Cycle
100%
Electrical Connection
DIN EN 175201-804
Hydraulic Fluid
Mineral Oil (HL, HLP) or HFD-R
Hysteresis
≤0.05%
Ip Rating
IP65
Max Coil Temperature
150 °C
Max Current Consumption
2 A
Max Operating Pressure
315 bar
Max Permissible Flow
80 l/min
Mounting Screw Torque
7 Nm
Nominal Flow
4 l/min
Porting Pattern
ISO 4401-03-02-0-94
Supply Voltage
24 V DC
Weight
3.0 kg
1620 Old Apex Road
Shipping & Payment Options
