Bosch Rexroth | 4WRSE10V25-3XG24K0A1V
4WRSE10V25-3X/G24K0/A1V
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSE10V25-3X/G24K0/A1V valve is produced by Bosch Rexroth for the 4WRSE High Response Control Valves series and is used to modulate hydraulic flow rapidly in automated machinery. Its size 10 body defines the interface dimensions for manifolds and subplates, while the ISO 4401-05-04-0-94 porting pattern keeps installation compatible with common CETOP 5 layouts. A nominal flow of 25 l/min at a 10 bar pressure drop establishes the baseline throughput for medium-capacity actuators. The electronics accept a ±10 V command input signal so motion controllers can drive the spool position directly, and the internal circuits are powered by a 24 V DC supply. A peak consumption of 2.8 A must be available from the power source, yet a 100 % duty cycle allows the coil to remain energized continuously without thermal derating. Hysteresis is held to ≤ 0.05 %, supporting repeatable positioning in closed-loop systems that require tight flow linearity.
The valve tolerates operating pressures up to 315 bar, enabling use in high-pressure presses or injection molds, and it can pass up to 180 l/min during transient flow peaks without damage. For feedback, an actual value signal of ±10 V at a maximum of 2 mA reports spool position to the controller, closing the electro-hydraulic loop. Wiring is made through a DIN EN 175201-804 plug, and the enclosure meets IP65 so splashing oil or dust does not impair operation. The coil insulation endures temperatures up to 150 °C, maintaining reliability under continuous load. FKM seals provide chemical resistance against common hydraulic fluids and elevated heat. A mass of 7.3 kg must be supported by the manifold or bracket, influencing the structural design of the mounting surface.
Technical Specifications
Actual Value Signal
±10 V (Imax 2 mA)
Coil Temperature
150 °C
Command Input Signal
±10 V
Duty Cycle
100%
Electrical Connection
DIN EN 175201-804 Plug
Hysteresis
≤ 0.05%
Max Current Consumption
2.8 A
Max Operating Pressure
315 bar
Max Permissible Flow
180 l/min
Nominal Flow @ Δp 10 Bar
25 l/min
Porting Pattern
ISO 4401-05-04-0-94
Protection Class
IP65
Seal Material
FKM
Size
10
Supply Voltage
24 V DC
Weight
7.3 kg
1620 Old Apex Road
Shipping & Payment Options
