Bosch Rexroth | 4WRSE10E50-3XG24K0A1V
4WRSE10E50-3X/G24K0/A1V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRSE10E50-3X/G24K0/A1V valve belongs to the 4WRSE High Response Control Valves series produced by Bosch Rexroth for precise hydraulic automation where fast spool movement and stable flow are required. It accepts a command signal of ±10 V so the drive electronics can issue symmetrical proportional references to the pilot stage. The actual value output is ±10 V with a 2 mA limit, providing feedback for closed-loop controllers without overloading their analog inputs. A 24 VDC supply powers the onboard electronics and solenoids, and an input resistance above 50 kΩ reduces loading on the control card. The valve can run at a 100 % duty cycle for continuous service, while a 4 A impulse current accelerates the spool during rapid changes. During steady operation it draws a maximum of 2.8 A, limiting cabinet power requirements. Hysteresis is kept at or below 0.05 %, supporting highly repeatable flow near the neutral position.
The unit tolerates operating pressures up to 315 bar, enabling use in high-pressure manifolds found in presses and molding machines. A nominal flow of 50 l/min at a 10 bar differential defines standard cylinder speed, and the valve can pass up to 180 l/min when fast traverse is needed. The ISO 4401-05-04-0-94 porting pattern matches common subplates so installation does not require special machining. IP65 protection shields the electronics from dust and water jets, and FKM seals withstand aggressive hydraulic fluids. The assembly weighs 7.3 kg, allowing direct manifold mounting without extra supports. Zero-point drift remains below 0.3 % per 100 bar, maintaining a stable neutral position as system pressure varies.
Technical Specifications
Actual Value Output
±10 V (2 mA max)
Command Signal
±10 V
Duty Cycle
100%
Hysteresis
<= 0.05%
Impulse Current
4 A
Input Resistance
>50 kΩ
Max Current Consumption
2.8 A
Max Operating Pressure
315 bar
Max Permissible Flow
180 l/min
Nominal Flow
50 l/min (10 bar Δp)
Porting Pattern
ISO 4401-05-04-0-94
Protection Class
IP65
Seal Material
FKM
Supply Voltage
24 VDC
Weight
7.3 kg
Zero Point Drift (pressure)
<0.3%/100 bar
1620 Old Apex Road
Shipping & Payment Options
