Bosch Rexroth | 4WRPH10C3B100P-2XG24Z4M
4WRPH10C3B100P-2X/G24Z4/M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPH10C3B100P-2X/G24Z4/M valve belongs to the 4WRP Solenoid Valves series and is produced by Bosch Rexroth for proportional control in hydraulic automation systems. With a nominal size of 10, it fits subplates prepared to the ISO 4401-05-04-0-94 pattern and regulates a nominal flow of 100 l/min to actuators. The unit follows the C3 4/4-way hydraulic symbol, so it provides four ports and four switching positions for bidirectional metering. Its P-type non-linear flow characteristic enables finer resolution near the zero position while still allowing full flow at higher command signals. The maximum working pressure on ports P, A, and B reaches 315 bar, while the return line can tolerate up to 250 bar on the T port, permitting installation in high-pressure circuits without additional relief valves.
Electrical operation is based on a 24 V DC supply that energizes the solenoid. The coil resistance at 20 °C is 2.4 Ω, which together with the supply voltage limits steady current, and peak draw is capped at 3.7 A to prevent coil overheating. Power consumption does not exceed 60 VA under rated conditions. The valve connects through a DIN 43650 two-pole plus PE plug, while position feedback is routed by a Pg7 four-pole connector that transmits a ±10 V transducer signal to the drive electronics. An IP65 enclosure rating protects the internal components from dust and low-pressure water jets, and NBR seals maintain fluid containment across the specified temperature range.
Technical Specifications
Coil Resistance (20 b0c)
2.4 2
Degree Of Protection
IP65
Flow Characteristic
Non-Linear (P)
Hydraulic Symbol
C3 (4/4-Way)
Max Power Consumption
60 VA
Max Return Pressure (t Port)
250 bar
Max Solenoid Current
3.7 A
Max Working Pressure (p, A, B)
315 bar
Nominal Flow
100 l/min
Nominal Size
10 (NG10)
Porting Pattern
ISO 4401-05-04-0-94
Seal Material
NBR
Solenoid Connector
DIN 43650 (2P+PE)
Supply Voltage
24 V DC
Transducer Connector
Pg7 (4P)
Transducer Signal
b110 V
1620 Old Apex Road
Shipping & Payment Options
