Bosch Rexroth | 4WRPEH10C4B50L-2XG24K0A1M
4WRPEH10C4B50L-2X/G24K0/A1M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPEH10C4B50L-2X/G24K0/A1M proportional solenoid valve is manufactured by Bosch Rexroth within the 4WRP Solenoid Valves series and is intended for precise flow regulation in hydraulic automation. The nominal size is NG10, setting the subplate footprint required for installation. A nominal flow of 50 l/min at a 35 bar pressure drop per edge supports medium-capacity circuits, and the linear 1:1 flow characteristic provides direct proportionality between spool stroke and flow rate. Maximum operating pressure reaches 315 bar on ports P, A, and B, while port T is limited to 250 bar, enabling high-pressure supply and return lines. Hysteresis is held to 0.2%, which keeps repeatability tight, and an actuating time of 25 ms allows rapid response in positioning or clamping tasks.
Command signals enter through a ±10 V analog control interface (A1) that aligns with standard motion controllers. The solenoid operates from a 24 V DC supply, draws up to 60 VA, and must be protected by a 2.5 A fuse to guard wiring against overloads. Continuous energization is permitted by a 100% duty cycle, and power reaches the coil through a 6P+PE connector that simplifies maintenance swaps. The housing carries an IP65 rating, offering complete dust protection and resistance to low-pressure water jets. Reliable service is maintained at ambient temperatures up to 50 °C, while hydraulic fluid temperatures can rise to 70 °C without derating, matching typical industrial reservoir conditions.
Technical Specifications
Actuating Time
25 ms
Ambient Temp (max)
+50 °C
Control Interface
±10 V (A1)
Duty Cycle
100%
Electrical Connection
6P+PE
Flow Characteristic
Linear 1:1
Hydraulic Fluid Temp (max)
+70 °C
Hysteresis (max)
0.2%
Max Operating Pressure (p/a/b)
315 bar
Max Operating Pressure (t)
250 bar
Max Power Consumption
60 VA
Nominal Flow (Δp 35 Bar/edge)
50 l/min
Nominal Size
NG10
Protection Class
IP65
Required Fuse
2.5 A
Supply Voltage
24 V DC
1620 Old Apex Road
Shipping & Payment Options
