Bosch Rexroth | 4WRPEH10C3B100L-2XG24K0F1M
4WRPEH10C3B100L-2X/G24K0/F1M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPEH10C3B100L-2X/G24K0/F1M valve is produced by Bosch Rexroth for the 4WRP Solenoid Valves series. It meters hydraulic flow proportionally to support automated actuator speed and position control. The NG10 size matches common medium-capacity manifolds in industrial machinery. A nominal flow rating of 100 l/min at a 35 bar drop per edge lets the circuit maintain required velocity without excessive pressure loss. The spool follows a linear flow characteristic so the output changes evenly with the command. Symbol C3 defines the land geometry that establishes the neutral crossover and port connections. Control electronics accept a 4–20 mA signal, allowing direct linkage to PLC analog outputs. An input load of 200 Ω calibrates the voltage drop across the interface for consistent scaling. Operation is powered from a 24 V DC supply and remains within tolerance as long as voltage stays above 21 V; this setup achieves a 0–100 % stroke response in 25 ms.
The subplate interface corresponds to ISO 4401-05-04-0-94, simplifying installation alongside other standardized components. Ports P, A, and B can withstand pressures up to 315 bar, accommodating high-pressure power units. Port T is restricted to 250 bar to protect return-line hardware. Environmental sealing reaches IP65, preventing dust and water jets from affecting the coil or spool. Electrical hookup is provided by a 6P+PE connector according to DIN 43563-AM6, which supplies signal lines and protective earth in one plug. Total mass is 7.1 kg, so mounting structures must support that load and absorb vibration. NBR sealing material maintains flexibility when exposed to common mineral hydraulic oils, ensuring low leakage over time. Together these characteristics enable dependable service in hydraulic automation installations.
Technical Specifications
Electrical Connector
6P+PE (DIN 43563-AM6)
Flow Characteristic
Linear (L)
Input Load (f1)
200 Ω
Input Signal
4–20 mA (F1)
Lower Supply Voltage Limit
21 V DC
Max Pressure (p/a/b)
315 bar
Max Pressure (t)
250 bar
Mounting Pattern
ISO 4401-05-04-0-94
Nominal Flow
100 l/min (Δp 35 bar/edge)
Protection Class
IP65
Response Time (0–100%)
25 ms
Seal Material
NBR
Spool Symbol
C3
Supply Voltage
24 V DC
Valve Size
NG10
Weight
7.1 kg
1620 Old Apex Road
Shipping & Payment Options
