Bosch Rexroth | 4WRPE6VC18S-2XG24K0F1M-948
4WRPE6VC18S-2X/G24K0/F1M-948
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPE6VC18S-2X/G24K0/F1M-948 valve is produced by Bosch Rexroth for the 4WRP Solenoid Valves series and is intended to meter hydraulic flow in closed-loop automation. It belongs to component series 2X and fits manifolds prepared to ISO 4401-03-02-0-94, so it integrates with standard size 6 subplates. Command signals in the F1 range of 4–12–20 mA are converted into spool position, while the 24 V DC supply powers the integrated electronics. A 6P+PE plug conforming to DIN 43563-AM6 provides the electrical connection, supporting rapid replacement in modular machines. The spool exhibits a progressive flow characteristic that helps achieve fine control at low openings and higher capacity near full stroke. Under a 5 bar pressure drop the valve supplies 18 L/min, giving predictable sizing data for actuator circuits. Full stroke response to a 100 percent step change completes in 20 ms, allowing tight loop performance in pressure or position applications.
Maximum working pressure reaches 315 bar on ports P, A, and B, while port T tolerates up to 200 bar, enabling use in high-pressure power units without external relief devices. Internal leakage per metering edge is limited to 80 cm³/min at a 100 bar differential, supporting energy efficiency and thermal stability. Static hysteresis stays at or below 0.3 percent, ensuring repeatable positioning when the command signal reverses. Operation remains reliable on oil filtered to ISO 4406 class 18/16/13, as this cleanliness level minimizes spool wear. The assembly withstands vibration loads of 25 g across three axes for 24 h, making it suitable for mobile or press-mounted installations. A mass of 3.9 kg simplifies handling during service while still providing structural stiffness for precise metering. Together these parameters define a valve that delivers consistent flow control in demanding hydraulic servo systems.
Technical Specifications
Command Interface
F1 (4–12–20 mA)
Component Series
2X
Electrical Connection
6P+PE (DIN 43563-AM6)
Flow Characteristic
Progressive
Fluid Cleanliness
ISO 4406 Class 18/16/13
Hysteresis
≤ 0.3 %
Leakage Per Metering Edge
80 cm³/min (Δp 100 bar)
Mass
3.9 kg
Mounting Interface
ISO 4401-03-02-0-94
Nominal Size
6
Port T Max Pressure
200 bar
Ports P/a/b Max Pressure
315 bar
Rated Flow (Δp 5 Bar)
18 L/min
Response Time (100% Step)
20 ms
Supply Voltage
24 V DC
Vibration Resistance
25 g (3 axes, 24 h)
1620 Old Apex Road
Shipping & Payment Options
