Bosch Rexroth | 4WRPE10Q5-50M-2XG24K0A1M-836
4WRPE10Q5-50M-2X/G24K0/A1M-836
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPE10Q5-50M-2X/G24K0/A1M-836 is produced by Bosch Rexroth in the 4WRP Solenoid Valves series and is intended for proportional flow and direction tasks in hydraulic automation. A nominal size of 10 sets the interface dimensions for manifold mounting, while a 24 V DC supply energizes the solenoid coil with a maximum power draw of 60 VA to keep cabinet loads moderate. The A1 control interface accepts a +10 V command signal so the product can follow analog position references from a motion controller. A response time of 25 ms for a full-stroke step supports fast axis changes in servo hydraulic systems. Wiring is completed through a 6P+PE DIN 43563 connector, and the enclosure carries an IP65 rating for dust-tight and hose-down environments. Resistance to vibration reaches 25 g, allowing installation on mobile or high-impact machinery. The mounting pattern follows ISO 4401-05-04-0-94 for compatibility with standard subplates, and the unit weighs 7.1 kg for straightforward handling during service.
The hydraulic section handles a nominal flow of 50 l/min at a 5 bar differential to supply medium-sized cylinders and motors. System pressures up to 315 bar are accepted on ports P, A, and B, while the return port T is limited to 200 bar to protect seals and tank lines. Internal leakage is capped at 80 cm³ per minute at 100 bar, reducing wasted energy and heat generation in closed-loop circuits. Operation is permitted in ambient temperatures up to 50 °C, and the hydraulic fluid may reach 70 °C without derating. These limits position the product for continuous duty in presses, injection molds, or test stands where elevated temperatures and high pressures are routine.
Technical Specifications
Degree Of Protection
IP65
Electrical Connection
6P+PE (DIN 43563)
Input Interface
A1 (+10 V)
Leakage At 100 Bar (max)
80 cm³/min
Max Pressure Port P/a/b
315 bar
Max Pressure Port T
200 bar
Maximum Ambient Temperature
+50 °C
Maximum Fluid Temperature
+70 °C
Mounting Pattern
ISO 4401-05-04-0-94
Nominal Flow (Δp=5 Bar)
50 l/min
Nominal Size
10
Response Time (100% Step)
25 ms
Solenoid Power Consumption
60 VA max
Supply Voltage
24 V DC
Valve Weight
7.1 kg
Vibration Resistance
25 g
1620 Old Apex Road
Shipping & Payment Options
