Bosch Rexroth | 4WRPE10E80SJ-2XG24K0A1M-785
4WRPE10E80SJ-2X/G24K0/A1M-785
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPE10E80SJ-2X/G24K0/A1M-785 proportional valve is manufactured by Bosch Rexroth within the 4WRP Solenoid Valves series for closed-loop hydraulic automation where accurate metering of oil is required. It is built around nominal size 10, giving port dimensions suited to mid-range power units, and it reaches a nominal flow of 80 l/min at a 5 bar differential so actuators receive consistent volume under standard operating conditions. A progressive flow characteristic lets the spool deliver fine resolution at low command levels before opening wider for maximum delivery, improving positional stability in servo circuits. The electronics accept a ±10 V command signal, and the 100 kΩ input impedance prevents the drive electronics from loading the motion controller output. A 24 V DC supply powers the amplifier stage, while a 6 + PE connector conforming to DIN 43563 simplifies field wiring. An external 2.5 A fuse is specified to interrupt excess current and protect the onboard components.
The valve mounts on subplates machined to ISO 4401-05-04-0-94, allowing quick replacement without disturbing pipework. Work ports A and B tolerate pressures up to 315 bar, and the tank port is limited to 200 bar so return lines remain within seal capability. Dynamic behavior is defined by a 40 ms response to a full-scale step and 10 ms when driven 10 percent beyond, enabling rapid correction in demanding control loops. An IP65 housing guards the coil and electronics against dust ingress and low-pressure jets of water, while NBR seals maintain compatibility with standard mineral hydraulic oils. The assembled unit weighs 8.3 kg, a value that guides support bracket selection during manifold installation.
Technical Specifications
Command Signal
±10 V (A1)
Degree Of Protection
IP65
Electrical Connector
6+PE (DIN 43563)
External Fuse
2.5 A
Flow Characteristic
Progressive (S)
Input Impedance
100 kΩ
Max Pressure (p, A, B)
315 bar
Max Tank Port Pressure (t)
200 bar
Mounting Interface
ISO 4401-05-04-0-94
Nominal Flow (Δp 5 Bar)
80 l/min
Nominal Size
10
Response Time (100% Step)
40 ms
Response Time (110% Step)
10 ms
Seal Material
NBR (M)
Supply Voltage
24 V DC
Weight
8.3 kg
1620 Old Apex Road
Shipping & Payment Options
