Bosch Rexroth | 4WRPE10E80SJ-2XG24K0A1M
4WRPE10E80SJ-2X/G24K0/A1M
Request a Quote
In-Stock, Ships Today
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRPE10E80SJ-2X/G24K0/A1M valve belongs to the 4WRP Solenoid Valves series and is manufactured by Bosch Rexroth for closed-loop hydraulic automation. It meters oil in servo circuits using a nominal size of 10 to match medium frame subplates. The ISO 4401-05-04-0-94 mounting pattern simplifies direct stacking onto standard manifolds while maintaining precise alignment. A nominal flow of 80 l/min lets the valve manage moderate actuator speeds without cavitation. The valve withstands 315 bar at ports P, A, and B, giving it range for high-pressure machine tool or press lines, and the tank port tolerates up to 200 bar so back-pressure compensation devices can be used. Internal leakage is limited to 80 cm³ per minute at each metering edge to conserve energy and hold position accurately. Step changes reach final position within 40 ms, supporting fast directional shifts in dynamic control loops. The assembly weighs 8.3 kg, allowing single-person handling during panel installation.
Electrical integration uses a 24 V DC supply, and power consumption remains below 60 VA so cabinet sources are not overloaded. A 6P+PE DIN 43563 connector provides separate pins for coils, feedback, and protective earth to streamline harness fabrication. The ±10 V setpoint input accepts standard analog commands from motion controllers, and an input impedance of 100 kΩ prevents loading of delicate output stages. An IP65 housing blocks dust and water jets, permitting installation on exposed machine frames. For circuit safety the manufacturer prescribes a 2.5 A external fuse, limiting fault current in the event of cable damage. Maximum hysteresis is held to 0.3 %, ensuring repeatable spool positioning during small signal changes. These electrical and environmental parameters complete the functional envelope begun above.
Technical Specifications
Degree Of Protection
IP65
Electrical Connector
6P+PE DIN 43563
External Fuse
2.5 A
Hysteresis
0.3% Max
Input Impedance
100 kΩ
Leakage Per Metering Edge
80 cm³/min
Max Operating Pressure (p,a,b)
315 bar
Max Tank Port Pressure (t)
200 bar
Mounting Pattern
ISO 4401-05-04-0-94
Nominal Flow
80 l/min
Nominal Size
10
Power Consumption
60 VA Max
Response Time (100% Step)
40 ms
Setpoint Input
±10 V
Supply Voltage
24 V DC
Weight
8.3 kg
1620 Old Apex Road
Shipping & Payment Options
