Bosch Rexroth | 4WRP10E32S-1XG24Z4M
4WRP10E32S-1X/G24Z4/M
Request a Quote
Call for Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRP10E32S-1X/G24Z4/M valve belongs to the 4WRP Solenoid Valves series from Bosch Rexroth and is intended for precise hydraulic automation. It is built in nominal size NG10 so it manages medium flow circuits without occupying excessive manifold space. A mounting interface of ISO 4401-05-06-0-94 allows direct stacking on standard sub-plates, streamlining installation. The solenoid operates on a 24 V DC supply; a coil resistance of 2.5 Ω at 20 °C and a maximum solenoid current of 3.7 A define the electrical load that the drive amplifier must deliver. Maximum power consumption is 60 VA, which guides power supply sizing. A DIN 43650 (ISO 4400) connector offers quick electrical connection, while LVDT AC/AC position feedback returns spool position for closed-loop control. The progressive flow characteristic permits fine metering over the command range, and a nominal flow of 32 l/min at a 5 bar differential across one notch indicates the attainable throughput under typical conditions.
The hydraulic section is rated for a working pressure of 315 bar at the P, A, and B ports so it fits high-pressure power units, whereas the T port endures up to 250 bar and the L drain port must stay below 2 bar to prevent back-pressure on the pilot stage. An IP65 ingress protection grade shields the coil and internal wiring from dust and low-pressure water jets, supporting outdoor or wash-down environments. NBR seals contain mineral hydraulic fluids and maintain leak-tight operation over the specified pressure range. A total weight of 8.0 kg informs bracket design and ensures the manifold can bear the valve mass without distortion.
Technical Specifications
Coil Resistance (20 °c)
2.5 Ω
Flow Characteristic
Progressive
Ingress Protection
IP65
Max Power Consumption
60 VA
Max Pressure (l Port)
2 bar
Max Pressure (t Port)
250 bar
Max Solenoid Current
3.7 A
Max Working Pressure (p,a,b)
315 bar
Mounting Interface
ISO 4401-05-06-0-94
Nominal Flow (Δp 5 Bar/notch)
32 l/min
Nominal Size
NG10
Position Feedback
LVDT AC/AC
Seal Material
NBR
Solenoid Connector
DIN 43650 (ISO 4400)
Supply Voltage
24 V DC
Weight
8.0 kg
1620 Old Apex Road
Shipping & Payment Options
