Bosch Rexroth | 4WRLE16Q5-200M-3XG24TK0A1M
4WRLE16Q5-200M-3X/G24TK0/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRLE16Q5-200M-3X/G24TK0/A1M valve belongs to the 4WRL Solenoid Valves series and is produced by Bosch Rexroth. It meters hydraulic flow in automation circuits that demand proportional control of pressure and direction. The valve is built to nominal size 16, allowing it to fit manifolds of medium flow capacity, and it shares the ISO 4401-07-07-0-05 mounting pattern so installation on standardized sub-plates is straightforward. A rated flow of 200 l/min at a 5 bar differential across the control edge lets the device handle high throughput without excessive pressure loss. The electronics run from a 24 VDC supply and consume up to 40 VA, which simplifies power budgeting in machine panels. Command signals are accepted as a differential input of plus or minus 10 V, and an input resistance of 100 kΩ protects upstream controllers from loading effects. The enclosure is classified to IP65, ensuring the spool and coils remain sealed against dust and low-pressure water jets during plant operation.
Its integrated electronics return an actual value output of plus or minus 10 V so the supervisory controller can verify spool position in real time. A time-lag fuse rated at 2.5 A provides over-current protection for the power stage, while overall hysteresis remains below 0.1 percent to maintain repeatable flow characteristics during bidirectional cycles. Response sensitivity is better than 0.05 percent, enabling fine adjustments to mirror small command changes. The permissible residual ripple on the 24 V line is limited to 2.5 Vpp, preventing coil chatter at unstable supplies. Hydraulic prerequisites include a minimum pilot pressure of 10 bar for stable spool actuation and a maximum return-line pressure of 210 bar at ports T or Y to avoid back-pressure induced errors. With a mass of 12 kg, the valve offers a sturdy housing that resists vibration yet can be handled without lifting equipment.
Technical Specifications
Actual Value Output (a1)
±10 V
Command Input (a1)
±10 V
Fuse Protection
2.5 A (Time-Lag)
Hysteresis
< 0.1%
Input Resistance (a1)
100 kΩ
Max Power Consumption
40 VA
Max Pressure Port T/y
210 bar
Max Residual Ripple
2.5 Vpp
Minimum Pilot Pressure
10 bar
Mounting Pattern
ISO 4401-07-07-0-05
Nominal Size
16 (NG16)
Protection Class
IP65
Rated Flow
200 l/min (Δp=5 bar/control edge)
Response Sensitivity
< 0.05%
Supply Voltage
24 VDC
Weight
12 kg
1620 Old Apex Road
Shipping & Payment Options
