Bosch Rexroth | 4WRLE16Q5-200M-3XG24K0A1M
4WRLE16Q5-200M-3X/G24K0/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRLE16Q5-200M-3X/G24K0/A1M proportional valve belongs to the 4WRL Solenoid Valves series from Bosch Rexroth and is used to regulate flow and pressure in closed-loop hydraulic automation. It accepts a ±10 V command signal that shifts the spool with proportional accuracy, while the internal electronics draw 40 VA from a 24 V DC supply to energize the solenoid. A nominal flow capacity of 200 l/min supports steady circuit demand, and a peak flow capability of 800 l/min permits short-term acceleration of actuators. The manifold interface follows the ISO 4401-07-07-0-05 pattern so the unit can mount directly on standardized subplates. Reliable actuation is maintained once pilot pressure reaches 10 bar, and the design is rated for a 100 percent duty cycle so it may remain energized without thermal delays.
For system safety, the valve body withstands 270 bar at ports P, A, and B, and holds the same 270 bar at pilot port X, while the tank return ports T and Y are limited to 210 bar. Fluid cleanness must not exceed ISO 4406 code 18/16/13 to prevent spool sticking and wear. An IP65 enclosure protects the coil and connector against dust ingress and low-pressure water jets, so cabinet mounting is not mandatory. The assembly may be installed in any orientation, giving designers freedom in crowded manifolds. NBR sealing elements contain standard mineral-oil media and resist common hydraulic additives. Total mass is 12 kg, a consideration for support brackets when the valve is suspended on pipework.
Technical Specifications
Cleanliness Class
ISO 4406 18/16/13
Command Input
±10 V (A1)
Installation Position
Any
Max Pressure (p, A, B)
270 bar
Max Pressure (t, Y)
210 bar
Max Pressure (x)
270 bar
Maximum Flow
800 l/min
Min Pilot Pressure
10 bar
Porting Pattern
ISO 4401-07-07-0-05
Power Consumption
40 VA
Protection Class
IP65
Rated Flow
200 l/min
Relative Duty Cycle
100%
Seal Material
NBR
Supply Voltage
24 V DC
Weight
12 kg
1620 Old Apex Road
Shipping & Payment Options
