Bosch Rexroth | 4WRLE16Q4-200M-3XG24TK0A1M
4WRLE16Q4-200M-3X/G24TK0/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRLE16Q4-200M-3X/G24TK0/A1M proportional solenoid valve is produced by Bosch Rexroth for the 4WRL Solenoid Valves series. It meters hydraulic flow and pressure in automated motion circuits. The valve is built to the NG16 size so it matches piping and manifold blocks designed for this envelope. Installation follows the ISO 4401-07-07-0-05 mounting pattern, allowing quick replacement on standardized subplates. A nominal supply of 24 V DC powers the integrated electronics while a ±10 V command input provides proportional positioning of the spool. At full opening the valve passes 200 l/min to support medium-to-high flow actuators, and it can sustain system pressures up to 350 bar without deformation. The pilot stage only needs 10 bar to shift the main spool, which reduces load on the auxiliary pump circuit. NBR seals are fitted to resist common mineral oils, and total electrical demand stays within 40 VA to limit cabinet power budgets.
For reliable service, the electronics accept a voltage range from 19 V DC to 36 V DC so control panels with minor bus variation remain within tolerance. Residual ripple must not exceed 2.5 Vpp, a limit that prevents coil chatter and keeps the spool stable. Line protection is handled by a 2.5 A time-lag fuse that clears sustained faults while ignoring inrush currents. The internal pilot network returns 11.5 l/min, a figure used when sizing the pump and tank return lines. Port X can be pressurized to 270 bar, whereas ports T and y are restricted to 210 bar, ensuring safe routing of drain and return oil. These pressure limits sit below the 350 bar main rating to protect the tank line components. Together these electrical and hydraulic constraints define the operating window and help integrators configure the valve for dependable motion control.
Technical Specifications
Command Value Input
±10 V
Fuse Rating
2.5 A (time-lag)
Max Operating Pressure
350 bar
Max Power Consumption
40 VA
Max Residual Ripple
2.5 Vpp
Max Supply Voltage
36 V DC
Min Supply Voltage
19 V DC
Minimum Pilot Pressure
10 bar
Mounting Pattern
ISO 4401-07-07-0-05
Pilot Oil Flow (q3)
11.5 l/min
Port X Max Pressure
270 bar
Ports T,y Max Pressure
210 bar
Rated Flow
200 l/min
Seal Material
NBR
Size
NG16
Supply Voltage
24 V DC
1620 Old Apex Road
Shipping & Payment Options
