Bosch Rexroth | 4WRLE10W80SJ-3XG24ETK0A1WX02M-744
4WRLE10W80SJ-3X/G24ETK0/A1WX02M-744
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRLE10W80SJ-3X/G24ETK0/A1WX02M-744 valve belongs to the 4WRL Solenoid Valves series from Bosch Rexroth and is applied in hydraulic automation to meter flow in proportion to an electrical command. With a nominal size of NG10 it fits medium-capacity manifolds, while the ISO 4401-05-05-0-05 mounting interface lets it bolt directly to standardized subplates without adapters. A maximum flow of 300 l/min supports cylinders and motors that demand high-volume supply, and the 40 ms actuating time from 0 to 100 percent enables fast response to load changes. Hysteresis is limited to 0.1 percent, giving tight repeatability for closed-loop pressure or position systems. The IP65 protection class seals the housing against dust and water jets common in machine environments. Stable operation requires at least 10 bar pilot pressure, so upstream circuits must maintain that level. Control electronics accept a ±10 V command input, allowing direct connection to most analog motion controllers.
Internal electronics are powered from a nominal 24 VDC source and will remain functional between 19 VDC and 36 VDC, providing tolerance for supply variation. Residual ripple must not exceed 2.5 Vpp to avoid unwanted dither in the solenoid force. Peak power consumption is 40 VA, a value used when sizing cabinet power supplies. A 2.5 A time-lag fuse on the supply line limits fault current while permitting the inrush associated with coil energization. Hydraulically, pilot port X can withstand up to 280 bar, and ports T and Y tolerate 250 bar back pressure, making the valve suitable for high-pressure circuits. These limits allow the unit to regulate actuators reliably across full stroke and speed ranges in demanding production cycles.
Technical Specifications
Actuating Time (0–100%)
40 ms
Command Input (a1)
±10 V
Fuse Rating
2.5 A (Time-Lag)
Max Flow
300 l/min
Max Hysteresis
0.1%
Max Pilot Port X Pressure
280 bar
Max Port T,y Pressure
250 bar
Max Power Consumption
40 VA
Max Residual Ripple
2.5 Vpp
Max Supply Voltage
36 VDC
Min Supply Voltage
19 VDC
Minimum Pilot Pressure
10 bar
Mounting Interface
ISO 4401-05-05-0-05
Nominal Size
NG10
Protection Class
IP65
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
