Bosch Rexroth | 4WRKE16W6-200L-3X6EG24K31A5D3M
4WRKE16W6-200L-3X/6EG24K31/A5D3M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRKE16W6-200L-3X/6EG24K31/A5D3M directional valve is manufactured by Bosch Rexroth within the 4WRKE Directional Valves series to meter flow and pressure for hydraulic automation tasks. It uses nominal size 16 ports to balance compact installation with moderate flow capacity, while the W6 spool design determines how fluid passages open as the spool shifts. A nominal flow rating of 200 L/min at a 10 bar differential pressure defines standard performance, and a maximum flow capability of 460 L/min accommodates short-term demand spikes. The valve tolerates operating pressures up to 350 bar so it can function in high-pressure circuits. A linear characteristic curve (code L) delivers proportional flow change for each increment of the ±10 V command signal, helping controllers predict response. The electronics accept a regulated 24 V DC supply that powers the proportional solenoids and internal circuitry.
External pilot oil supply keeps the control stage fed with clean fluid that is isolated from main line transients, and an external pilot oil drain returns pilot flow directly to tank to prevent backpressure on the spool driver. A DIN EN 175201-804 electrical connector provides standardized contacts for quick field wiring, and the solenoid can draw up to 1.5 A to reach full actuation force. Maximum electrical power consumption of 72 W guides fuse sizing and heat management in the control cabinet. The housing carries an IP65 rating, blocking dust and low-pressure water jets in factory settings, and NBR seals maintain compatibility with common mineral-based hydraulic oils. Finally, the ISO 4401-07-06-0-94 mounting pattern lets the valve bolt to industry-standard subplates or manifolds without adapters.
Technical Specifications
Characteristic Curve
L (Linear)
Command Signal
±10 V
Electrical Connector
DIN EN 175201-804
Max Operating Pressure (p,a,b)
350 bar
Max Permissible Flow
460 L/min
Mounting Pattern
ISO 4401-07-06-0-94
Nominal Flow
200 L/min (Δp 10 bar)
Nominal Size
16
Pilot Oil Drain
External
Pilot Oil Supply
External
Power (max)
72 W
Protection Class
IP65
Seal Material
NBR
Spool Type
W6
Supply Current (max)
1.5 A
Supply Voltage
24 VDC
1620 Old Apex Road
Shipping & Payment Options
