Bosch Rexroth | 4WRAE10W60-2XG24N9K31F1V
4WRAE10W60-2X/G24N9K31/F1V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRAE10W60-2X/G24N9K31/F1V valve is produced by Bosch Rexroth for the 4WRA Proportional Directional Valves series. It meters hydraulic flow in closed-loop automation systems where precise actuator speed and direction are required. The valve is built to the NG10 nominal size, giving it port dimensions suitable for medium-frame manifolds. A W-type spool is fitted, shaping the internal orifice geometry for symmetrical bidirectional control. Under a 10 bar differential, nominal flow reaches 60 l/min, while the design allows up to 75 l/min for transient peaks. It installs on the ISO 4401-05-04-0-94 mounting pattern to maintain interchangeability with standard sub-plates. Each solenoid has a 2 Ω coil at 20 °C and accepts up to 2.5 A, enabling fast magnetic actuation. An IP65 enclosure rating protects the housing against dust ingress and low-pressure water.
Electronic actuation is powered from a 24 VDC supply; the electronics remain operative down to 19 VDC and tolerate surges up to 35 VDC, preventing dropouts on noisy machine networks. A 4–20 mA command signal positions the spool proportionally, allowing integration with common PLC analog outputs. Electrical hookup is through a DIN EN 175201-804 connector, which secures the cable sheath and provides strain relief. Hydraulic stresses are managed by a 315 bar limit at ports A, B, and P, while the return line at port T is restricted to 210 bar, so manifold design must accommodate this difference. FKM seals are installed to resist mineral oil and elevated temperature, maintaining leakage control during continuous duty.
Technical Specifications
Coil Resistance (20 °c)
2 Ω
Command Input
4–20 mA
Electrical Connector
DIN EN 175201-804
Lower Voltage Limit
19 VDC
Max Current Per Solenoid
2.5 A
Max Permissible Flow
75 l/min
Max Pressure (port T)
210 bar
Max Pressure (ports A/b/p)
315 bar
Mounting Pattern
ISO 4401-05-04-0-94
Nominal Flow (Δp=10 Bar)
60 l/min
Nominal Size
NG10
Protection Class
IP65
Seal Material
FKM
Spool Symbol
W
Supply Voltage (nominal)
24 VDC
Upper Voltage Limit
35 VDC
1620 Old Apex Road
Shipping & Payment Options
