Bosch Rexroth | 4WRAE10EA60-2XG24N9K31F1V
4WRAE10EA60-2X/G24N9K31/F1V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRAE10EA60-2X/G24N9K31/F1V proportional directional valve belongs to the 4WRA Proportional Directional Valves series produced by Bosch Rexroth for hydraulic automation circuits that demand variable flow and directional control. It is supplied in nominal size 10 (NG10), allowing integration into standard subplates without adapters. The porting pattern follows ISO 4401-05-04-0-94 so manifold drilling remains consistent across installations. A spool identified by symbol EA provides the metering edges required for balanced flow in both directions, and the nominal flow reaches 60 l/min at a 10 bar differential pressure. Electrical actuation relies on a 4–20 mA command value coupled to a 24 V DC solenoid supply, enabling direct interface with common PLC outputs. Connection is made through a 7-pin plug conforming to EN 175201-804, and when the matching plug is fitted the housing achieves an IP65 protection class, guarding internal parts against dust and low-pressure water jets.
Hydraulic ratings permit continuous operation at 315 bar on ports A, B, and P, while port T can withstand up to 210 bar, covering typical return-line surges. The valve supports a maximum permissible flow of 75 l/min, ensuring adequate headroom above its nominal figure for transient demand peaks. Recommended fluid viscosity spans 20–380 mm²/s so the spool can maintain predictable throttling across a wide temperature range. System cleanliness must meet ISO 4406 20/18/15 to protect precision edges from contamination-induced wear. These requirements are complemented by a unit weight of 6.8 kg, which simplifies handling during panel or manifold assembly without compromising structural rigidity.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Command Value Input
4–20 mA
Electrical Connector
7-pin (EN 175201-804)
Max Operating Pressure (a/b/p)
315 bar
Max Permissible Flow
75 l/min
Max Pressure Port T
210 bar
Nominal Flow (Δp=10 Bar)
60 l/min
Nominal Size
10 (NG10)
Porting Pattern
ISO 4401-05-04-0-94
Protection Class
IP65 (with mating connector)
Spool Symbol
EA
Supply Voltage
24 V DC
Viscosity Range
20–380 mm²/s
Weight
6.8 kg
1620 Old Apex Road
Shipping & Payment Options
