Bosch Rexroth | 4WRA6E07-2XG24N9K4V
4WRA6E07-2X/G24N9K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRA6E07-2X/G24N9K4/V is produced by Bosch Rexroth within the 4WRA Proportional Directional Valves series and is intended to direct hydraulic flow for automated machinery. It is supplied in size 6, enabling installation on compact manifolds where space and response time are critical. Subplate mounting is used, and the body follows the ISO 4401-03-02-0-05 porting pattern to align with standard base plates. A 2-pole plus protective earth connector in design A format provides the electrical interface to the proportional solenoid. A concealed manual override allows technicians to shift the spool mechanically during commissioning or power loss. The enclosure meets IP65, and reliable function is maintained in environments with relative humidity up to 95 percent. FKM seals resist common hydraulic fluids, while a cleanliness level not exceeding ISO 4406 20/18/15 is required to prevent sticking and leakage.
The valve supplies a nominal flow rate of 7 l/min for precise positioning tasks and can pass up to 42 l/min when fully actuated. Pressure capability reaches 350 bar at ports a, b, and p, whereas the tank port t is limited to 210 bar to safeguard return circuits. External surfaces may rise to 150 °C, so thermal insulation or spacing must be considered when mounted near heat-sensitive components. Functional safety planning is supported by an Mttfd of 150 years, indicating a low probability of dangerous failure during its service life. The assembly weighs 2.0 kg, allowing a single technician to handle installation without lifting equipment. Accurate performance depends on adhering to the stated flow, pressure, temperature, and cleanliness limits during operation.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Electrical Connector
2-Pole + PE (Design A)
Manual Override
Concealed
Max Operating Pressure (a/b/p)
350 bar
Max Relative Humidity
95%
Max Surface Temperature
150 °C
Max Tank Port Pressure (t)
210 bar
Maximum Flow
42 l/min
Mttfd
150 Years
Nominal Flow
7 l/min
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Seal Material
FKM
Size
6
Type Of Connection
Subplate Mounting
Weight
2.0 kg
1620 Old Apex Road
Shipping & Payment Options
