Bosch Rexroth | 4WRA10EA60-2XG24N9K4V
4WRA10EA60-2X/G24N9K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRA10EA60-2X/G24N9K4/V proportional directional valve is built by Bosch Rexroth for the 4WRA Proportional Directional Valves series. It meters hydraulic flow and direction in automation circuits that need variable control rather than on-off switching. The unit operates on a 24 VDC supply so it can tie directly into common machine control voltages. A coil resistance of 2 Ω at 20 °C lets the drive electronics calculate current precisely for spool positioning. Each solenoid accepts up to 2.5 A, providing the magnetic force required to shift the EA spool across its two switching positions. The rated duty cycle is 100 percent, meaning continuous energization is possible without overheating. Internal hysteresis stays below 5 percent, allowing repeatable flow characteristics when the command signal cycles. The valve body matches nominal size 10 and mounts to manifolds that follow the ISO 4401-05-04-0-94 porting pattern for straightforward block integration.
Hydraulic performance is defined by a nominal flow of 60 l/min at a 10 bar pressure drop, while the design still permits up to 75 l/min when passages are fully opened. Pressure boundaries reach 315 bar on ports A, B, and P, whereas port T is limited to 210 bar to protect the return line. An FKM seal set resists high temperature oil and common industrial fluids. The maximum coil temperature of 150 °C safeguards the winding insulation during continuous service near hot manifolds. Electrical hookup is completed through a DIN EN 175301-803 connector, giving fast field replacement of coils. Only two distinct switching positions are provided, simplifying control logic in proportional closed-loop systems. Together these characteristics support precise, durable direction and flow regulation for servo-hydraulic machines.
Technical Specifications
Coil Resistance (20 °c)
2 Ω
Duty Cycle
100%
Electrical Connector
DIN EN 175301-803
Hysteresis (max)
5%
Max Coil Temperature
150 °C
Max Current Per Solenoid
2.5 A
Max Permissible Flow
75 l/min
Max Pressure A/b/p
315 bar
Max Pressure T
210 bar
Nominal Flow (Δp 10 Bar)
60 l/min
Nominal Size
10
Porting Pattern
ISO 4401-05-04-0-94
Seal Material
FKM
Spool Symbol
EA
Supply Voltage
24 VDC
Switching Positions
2
1620 Old Apex Road
Shipping & Payment Options
